Are you struggling with your rockspace extender login? If yes, then you need to follow some expert tips. In this post, we will share some expert technician’s guidance. It will help you to resolve your Rockspace WiFi extender issue.
Rockspace Extender Login Instruction:
You must log in on the router website, for instance. If your router is made by Netgear, Comcast, or another brand, then you can visit its login page by entering its default IP address in a web browser. I’ll demonstrate how to go to the router’s login screen down below.
- Open your computer’s Command Prompt.
- Enter the “ipconfig” command.
- Your router’s access Ip is shown in front of the “default gateway”.
When you login to the router page, then you need to find the connecting device list or DHCP list option. You need to find the IP of Rockspace extender under the connecting device. You can get to the Rockspace extender’s login page using the IP address. See the Rocksopace router connecting device example below:
Update The Firmware Of Rockspace WiFi Extender
By logging on to the extender page, you can upgrade the Rockspace extender’s firmware. By using this re.rockspace.local IP address you can easily get access to the page.
- When you login to the Rockspace extender page, then you should click on the administration option.
- Next, choose the firmware update option under the administration.
- Now, you need to find the file on your computer to upgrade the newest firmware.
- The firmware upgrade may take up to 2 to 3 minutes, after you click on the install.
- After that, your Rockspace extender will reboot, during the update.
- Ensure that you do not turn off the electricity, otherwise there’s a chance the extender won’t work
Look At The Current Version Of Firmware:
In this point, you will get the information about install and available versions of AP firmware with the help of the gateway wireless controller. Follow these steps:
- Firstly, the firebox’s current Access Point Firmware version is first shown in the Access Point Firmware section. On a partner access point, the Firebox can install this firmware version.
- Secondly, the version block on the access point display the update firmware version which fill on each associate access point
- Finally, to learn more about the Gateway Wireless Controller, visit Monitor AP Status on the Fireware Web UI Dashboard pages or Firebox System Manager.
Note: Only the official website is where you can download the Rockspace extender firmware.
Rockspace Extender Not Working After The Firmware Update
If your WiFi extender is still not working after the firmware upgrade, then you need to follow these tips:
-
No Visible Light On Rockspace Extender:
In that case if you don’t see solid signal light on your extender then the possible reason is your extender can disconnect from your router. It occurs whenever you upgrade the firmware on your router, change the WiFi password, or make any other configuration changes. Below there are some solving tips for all possible reasons.
- If your firmware is not up to date, then you should try to power cycle your both devices.
- If you switch the main WiFi password, then you have to reset your Rockspace WiFi extender and arrange it in order with a new password.
- Now, check the power connection. Ensure you do not connect the device to a surge protector.
-
Red Light on the Rockspace Extender:
The Rockspace extender has a connectivity problem, if it has a red light on it. It occurs when there are too many barriers separating the main router from the Rockspace extender or when the extender is unable to receive a WiFi signal from the router. Steps to resolve this problem:
- Try connecting the extender to the WiFi network. The amount of ground they can cover varies from model to model. Consult the handbook and position your extender as necessary.
- Now, examine the WiFi channel settings on the router. Switch to automatic channel selection.
- For good results, try upgrading your router’s firmware.
-
Blinking lights on Rockspace extender:
Is your rockspace extender setup showing blinking light continuously? If yes, it means that the problem is either hardware relating or the result of a faulty firmware upgrade. Your extender powering down during the firmware update is the cause of the corrupt firmware update. Steps to fix this problem:
- Firstly you should try to reset your Rockspace WiFi extender.
- Now, press the reset button for 45 seconds.
- Next, install the firmware again or attempt to upgrade it.
- After that, try to replace your extender, if your device is still under the warranty.
Final Verdict
In this post, you get the knowledge about login into the Rockspace WiFi extender and also know about firmware upgradation or LED light related details. We hope it will help you to resolve your firmware upgrade problem. In the other case, if you are facing any problem, then you can discuss it with us.
